Baumer VCXG
The VCXG series has up to 2 outputs for illumination control.
The camera can alternatively be supplied via POE (Power over Ethernet), whereby the supply via the IO port is preferred internally.
Information: Output 2 is a GPIO with 3.3V switching voltage, therefore this output is used as GND switching (NPN).
Information: The GigE features Light0Mode and Light1Mode should be used to control the lights.
| Pin | Color | Description | Connection from / to | Comment |
|---|---|---|---|---|
| 1 | Weiß | GPIO (Line 2) | - | |
| 2 | Braun | Power VCC | Power supply +24V | |
| 3 | Grün | IN 1 (Line 0) | Hardware Trigger | Optional trigger signal +24V |
| 4 | Gelb | GND IN1 | Power supply GND | |
| 5 | Grau | Power VCC Out1 | Power supply +24V | |
| 6 | Pink | OUT 1 (Line 3) | Output 1 for illumination 1 | |
| 7 | Blau | GND (Power & GPIO) | Power supply GND | |
| 8 | Rot | GPIO 1 (Line 1) | Output 2 for illumination 2 |
Illumination with optocoupler
A fast optocoupler can be used to control the illumination. The control differs depending on the illumination input, because output 1 and 2 are wired differently.
| Terminal | Type | Connection from / to | Comment |
|---|---|---|---|
| A1 | Input + | Output 1 for illumination 1 (Pink) | Switching output of the camera |
| A2 | Input - | Power supply GND | |
| 13+ | +24V | Power supply +24V | |
| 14 | Output | Illumination +24V | +24V of the lighting |
Illumination with Gardasoft lightning controller
Depending on the lightning controller, a different number of channels is available. The channel used is not relevant for the wiring and can be freely selected.
| Terminal | Type | Connection from / to | Comment |
|---|---|---|---|
| TRIG1+ | Input | Output 1 for illumination1 (Pink) | Switching output of the camera |
| TRIG1- | Input | Power supply GND | |
| LED1+ | Output | Illumination +24VDC | Direct connection of the illumination |
| LED1- | Output | Illumination GND | Direct connection of the illumination |
| TRIG2+ | Input | Power supply +24V | |
| TRIG2- | Input | Output 2 for illumination 2 (Rot) | Switching output of the camera |
| LED2+ | Output | Illumination +24VDC | Direct connection of the illumination |
| LED2- | Output | Illumination GND | Direct connection of the illumination |